Welkom gast! Om van alle functies gebruik te kunnen maken kun je Inloggen of Registreren.

Mededeling

Icon
Error

2 Pagina's<12
Opties
Bekijk
Ga naar laatste bericht Ga naar het laatste ongelezen bericht
Offline icaunais  
#21 Gepost : woensdag 4 juli 2018 11:14:52(UTC)
icaunais

Groep: Registered
Lid sinds: 21-12-2013(UTC)
Berichten: 10
Frankrijk
I used this:

Eerst geschreven door: Underground Ga naar gequote bericht


More specifically, I followed the instructions for parts A and B1.
Offline SaGeoFinn  
#22 Gepost : woensdag 4 juli 2018 16:35:43(UTC)
SaGeoFinn

Groep: Registered
Lid sinds: 2-7-2018(UTC)
Berichten: 4
Finland
Locatie: Kymenlaakso, Valkeala
Eerst geschreven door: icaunais Ga naar gequote bericht
Hi,

I had the same problem (also on Win7), and now "it works!".
Can you confirm its "fixed"?

I used this:

Eerst geschreven door: Underground Ga naar gequote bericht


More specifically, I followed the instructions for parts A and B1.


Hi

This has not been resolved for me, I tried the steps A and B1 but still the same error

did anyone else get this fixed yet?
Offline SaGeoFinn  
#23 Gepost : woensdag 4 juli 2018 16:40:36(UTC)
SaGeoFinn

Groep: Registered
Lid sinds: 2-7-2018(UTC)
Berichten: 4
Finland
Locatie: Kymenlaakso, Valkeala
Eerst geschreven door: icaunais Ga naar gequote bericht
Hi,

I had the same problem (also on Win7), and now "it works!".
Can you confirm its "fixed"?

I used this:

Eerst geschreven door: Underground Ga naar gequote bericht


More specifically, I followed the instructions for parts A and B1.


Hi

This has not been resolved for me, I tried the steps A and B1 but still the same error

did anyone else get this fixed yet?
Offline cirkel  
#24 Gepost : zaterdag 7 juli 2018 12:27:42(UTC)
cirkel

Groep: Betalend lid, Registered
Lid sinds: 22-10-2009(UTC)
Berichten: 95
Locatie: renkum
Weet iemand de oplossing al, de vorige oplossing werkt voor mij ook niet.
En Goh, wat mis ik een goed werkende GAPPDrool
Vriendelijke groeten
Cirkel
Offline Jason  
#25 Gepost : zaterdag 7 juli 2018 14:21:21(UTC)
Jason

Groep: Registered
Lid sinds: 1-7-2018(UTC)
Berichten: 7
Duitsland
As advised to do, I contacted the support of Groundspeak. After a short discussion I've got this answer today:

Quote:
The web-based API, GAPP, is still affected due to specific security standards that were not met. An article was published on our blog about this:

https://www.geocaching.com/blog/2018/07/security-update-required-for-android-devices/

It is still encouraged to reach out to the app’s developer.

Therefore, my question again: How can this issue being fixed to furthermore use GAPP correctly?

BTW: Win7 is not an outdated OS. It is one of three Microsoft OS in parallel, still supported and running on several PCs.
Offline Underground  
#26 Gepost : zaterdag 7 juli 2018 20:21:36(UTC)
Underground

Groep: Administrators
Lid sinds: 25-5-2009(UTC)
Berichten: 5.313
Nederland
Eerst geschreven door: Jason Ga naar gequote bericht
As advised to do, I contacted the support of Groundspeak. After a short discussion I've got this answer today:

Quote:
The web-based API, GAPP, is still affected due to specific security standards that were not met. An article was published on our blog about this:

https://www.geocaching.com/blog/2018/07/security-update-required-for-android-devices/

It is still encouraged to reach out to the app’s developer.

Therefore, my question again: How can this issue being fixed to furthermore use GAPP correctly?

BTW: Win7 is not an outdated OS. It is one of three Microsoft OS in parallel, still supported and running on several PCs.

The blog post by groundspeak which are you referring to is not the same because it is about Android. But it is kind of the same, because like Android, older versions of that OS causes the same problem.
With Windows 10, there is no problem. However, on Windows 7 there is a problem regarding the TLS1.0 in combination with .NET.

I will have to google a bit more on how this problem can be resolved (if it can be resolved).
As mentioned in my first reply in this thread, you can change registry settings to fix this. Seems to work for some.

I will continue to look for a solution. If I think I can try something, I will contact one of you to perform a test, because I cannot test it, because I don't have Windows 7 (I performed the free upgrade to Windows 10 on all the machines here)

It is true that Win7 is still supported by Microsoft. However, the support will stop in 2020.
I meant with outdated that there is a newer version for years already (actually, after Windows 7 we are already 4 version further (150? , 1607, 1709, and now the most recent 1803) (and I think the 1607 is the LTS version, at least for the embedded version)

If there is a solution, I will try to implement it. But if I cannot find one, you either have to change the registry settings (like I did on our webserver running Windows Server 2012R2) or upgrade to Windows 10 if you want to continue to use GAPP.
But again, I will try to find a solution.

Bewerkt door de gebruiker zaterdag 7 juli 2018 22:02:34(UTC)  | Reden: Niet aangegeven

Offline cirkel  
#27 Gepost : maandag 9 juli 2018 11:19:21(UTC)
cirkel

Groep: Betalend lid, Registered
Lid sinds: 22-10-2009(UTC)
Berichten: 95
Locatie: renkum
Eerst geschreven door: cirkel Ga naar gequote bericht
Weet iemand de oplossing al, de vorige oplossing werkt voor mij ook niet.
En Goh, wat mis ik een goed werkende GAPPDrool


Now it works for me. It turned out that I made a typing mistake in the regedit while doing the ateps A and B1 as described above.


Vriendelijke groeten
Cirkel
thanks cirkel is 1x bedankt voor deze nuttige post.
Underground op 9-7-2018(UTC)
Offline Jason  
#28 Gepost : woensdag 11 juli 2018 18:45:57(UTC)
Jason

Groep: Registered
Lid sinds: 1-7-2018(UTC)
Berichten: 7
Duitsland
Now I had some time to follow the instructions given by @Underground above.

https://success.outsystems.com/Support/Enterprise_Customers/Maintenance_and_Operations/(.NET)_Enable_SSL_Protocols_for_your_Integrations_-_TLS_1.1_and_TLS_1.2

I also did the steps A and B1 and it works!

Thank you again for your help.
thanks Jason is 1x bedankt voor deze nuttige post.
Underground op 13-7-2018(UTC)
Rss Feed  Atom Feed
Gebruikers aanwezig in dit topic
2 Pagina's<12
Spring naar forum  
Je kunt hier geen nieuwe berichten plaatsen.
Je kunt hier niet antwoorden op berichten.
Je kunt hier geen eigen berichten verwijderen.
Je kunt hier geen eigen berichten bewerken.
Je kunt hier geen Polls creëren.
Je kunt hier niet stemmen op Polls.